-
Desert Tiger BA27 Cost Down Military Uniform
-
The Elite Survival Systems Evolve Tactical Vest is a 100% MOLLE, modular tactical vest with stacked MOLLE webbing on the front offering more versatility in placing pouches. The back panel is a full MOLLE panel with a reinforced drag handle and hydration sleeve. If you’re looking for ultimate customization, look no further than the Evolve Tactical Vest.
Features of Elite Survival Systems Evolve Tactical Vest
- Interchangeable panels allow for total customization
- Non-slip shooting panel on shoulders
- 100% 1000 denier nylon construction for durability
- High tensile breathable nylon mesh
- Nylon webbing
- YKK zippers
- Heavy-duty buckles and slides
- Velcro and snap closures
- Velcro loop patch for identification
- 100% MOLLE modular tactical vest offers versatility in placing pouches
- Back full-MOLLE panel with reinforced drag handle and hydration sleeve
- Lifetime guarantee
-
The Elite Survival Systems Payload Tactical Vest offers six rifle magazine pouches (three on each side) holding a total of twelve .223 magazines or six .308 magazines. The system also has two pistol magazine pouches (one on each side), as well as two utility pouches (one on each side). The back panel is a full-MOLLE panel with a reinforced drag handle and hydration sleeve. With a lifetime guarantee and a durable 1000 denier nylon construction, you can’t go wrong with the Elite Survival Systems Evolve Tactical Vest.
Features of Elite Survival Systems Payload Tactical Vest
- Interchangeable panels allow for total customization
- Non-slip shooting panel on shoulders
- 100% 1000 denier nylon construction for durability
- High tensile breathable nylon mesh
- Nylon webbing
- YKK zippers
- Heavy-duty buckles and slides
- Velcro and snap closures
- Velcro loop patch for identification
- Two pistol magazine pouches (one on each side)
- Two utility pouches (one on each side)
- Six rifle magazine pouches (three on each side) hold up to twelve .223 magazines or six .308 magazines
- Utility pouch
- Back full-MOLLE panel with reinforced drag handle and hydration sleeve
- Lifetime guarantee
-
- Outer top shell made from 210T Ripstop Nylon with a Teflon finish.
- Outer bottom shell made from 210D Nylon Oxford with PU2000mm waterproof finish.
- Inner shell made from 210T Ripstop Nylon.
- 80gm per square meter Dupont Thermolite™ Micro insulation.
- Insulation incorporates an ultra-thin barrier of anti-bacterial pure silver micro fiber which also increases its heat retaining capability.
- Insulation is flat filled to prevent cold spots.
- Internal baffle foot is re-enforced with 210D Nylon Oxford with PU2000mm waterproof finish to limit damage from boots.
- Internal and external hanging tabs.
- Bonded seams
- Central double puller, heavy duty No 8 spiral zip with storm flap.
- Anti-snag zip with Velcro tab closure.
- Draw cord and barrel lock in hood.
- Shaped hood for extra comfort.
- Internal PDA pocket
- 210D Nylon Oxford spider compression sack.
- Designed for operations in +5 degree Celsius locations.
- Dims unpacked: Length 220cm. W width: at shoulders 85cm. at feet 55cm.
- Dims packed in compression sack: 18cm x 20cm
- Weight: 1.15kg
- ISO 9001:2000 compliant
-
On issue with the RAAF, commandos & NATO, U.S. forces in Iraq and other forces world wide makes this bag no ordinary item! The 1220 sleeping bag is a military 2 season sleeping bag, the sleeping bag can be laundered in the normal manner and will perform more efficiently than bags with natural fillings when wet. The bag and the compression sack weigh approx 2lbs 15oz (1.33kg). The Compression Sack spider both reduces the volume of the rolled bag for carriage and also provide a waterproof outer to prevent the bag from getting wet. Packs up very small so you can stash it away in your kit.
Features:
- Outer top shell made from 210T Ripstop Nylon with a Teflon finish.
- Outer bottom shell made from 210D Nylon Oxford with PU2000mm waterproof finish.
- Inner shell made from 210T Ripstop Nylon.
- 100gm per square meter Dupont Thermolite™ Micro insulation.
- Insulation incorporates an ultra-thin barrier of anti-bacterial pure silver micro fiber which also increases its heat retaining capability.
- Insulation is flat filled to prevent cold spots.
- Internal baffle foot is re-enforced with 210D Nylon Oxford with PU2000mm waterproof finish to limit damage from boots.
- Internal and external hanging tabs.
- Bonded seams
- Central double puller, heavy duty No 8 spiral zip with storm flap.
- Anti-snag zip with Velcro tab closure.
- Draw cord and barrel lock in hood.
- Shaped hood for extra comfort.
- Internal PDA pocket
- 210D Nylon Oxford spider compression sack.
- Designed for operations in -5 degree Celsius locations.
- Dims unpacked: Length 220cm. Width: at shoulders 85cm. at feet 55cm.
- Dims packed in compression sack: 21cm x 20cm
- Weight: 1.35kg
- NATO Stock No. 66 – 146-06-76
- ISO 9001:2000 compliant
-
- Outer top shell made from 210T Ripstop Nylon with a Teflon ® finish.
- Outer bottom shell made from 210D Nylon Oxford with PU2000mm waterproof finish.
- Inner shell made from 210T Ripstop Nylon.
- 200gm per square meter Dupont ® Thermolite™ Micro insulation.
- Insulation incorporates an ultra-thin barrier of anti-bacterial pure silver micro fiber which also increases its heat retaining capability.
- Insulation is flat filled to prevent cold spots.
- Internal baffle foot is re-enforced with 210D Nylon Oxford with PU2000mm waterproof finish to limit damage from boots.
- Internal and external hanging tabs.
- Bonded seams
- Central double puller, heavy duty No 8 spiral zip with storm flap.
- Anti-snag zip with Velcro tab closure.
- Draw cord and barrel lock in hood.
- Shaped hood for extra comfort.
- Internal PDA pocket
- 210D Nylon Oxford spider compression sack.
- Designed for operations in -10 degree Celsius locations.
- Dims unpacked: Length 220cm. Width: at shoulders 85cm. at feet 55cm.
- Dims packed in compression sack: 22cm x 24cm
- Weight: 1.45kg
- ISO 9001:2000 compliant
-
- Outer top shell made from 210T Ripstop Nylon with a Teflon ® finish.
- Outer bottom shell made from 210D Nylon Oxford with PU2000mm waterproof finish.
- Inner shell made from 210T Ripstop Nylon.
- 300gm per square meter Dupont ® Thermolite™ Micro insulation.
- Insulation incorporates an ultra-thin barrier of anti-bacterial pure silver micro fiber which also increases its heat retaining capability.
- Insulation is flat filled to prevent cold spots.
- Internal baffle foot is re-enforced with 210D Nylon Oxford with PU2000mm waterproof finish to limit damage from boots.
- Internal and external hanging tabs.
- Bonded seams
- Central double puller, heavy duty No 8 spiral zip with storm flap.
- Anti-snag zip with Velcro tab closure.
- Draw cord and barrel lock in hood.
- Shaped hood for extra comfort.
- Internal PDA pocket
- 210D Nylon Oxford spider compression sack.
- Designed for operations in -20 degree Celsius locations.
- Dims unpacked: Length 228cm. W width: at shoulders 85cm. at feet 55cm.
- Dims packed in compression sack: 27cm x 26cm
- Weight: 1.95kg
- ISO 9001:2000 compliant
-
English Desert BA19 Cost Down Military Uniform
-
The Ergodyne Fleece Balaclava is a perfect basic balaclava, made with stretchable polyester fleece to keep you warm in extreme conditions. Whether you’re hitting the slopes, working outside or riding a motorcycle, this balaclava will keep you protected from the elements while fitting easily under a helmet or hat. An updated longer length of the neck allows it to be tucked into a shirt or jacket to seal out the cold and keep in the warmth. You will stay visible on the job or in darker lighting with reflective accents. Don’t let cold weather ruin being outside, and let the Ergodyne Fleece Balaclava protect you from the elements.
Features of Ergodyne Fleece Balaclava
- Polyester fleece for warmth in extreme conditions
- Updated longer length
- Reflective accents for visibility
- Brushed interior fabric
-
The Ergodyne Two-Piece Fleece and Neoprene Balaclava, constructed with stretchable polyester fleece and a neoprene nose and mouth cover, is made to have the ultimate versatility. The two-piece construction allows it to easily convert to wear three different ways as a headpiece, neck gaiter or a full balaclava. It also features hook and loop straps on the head to easily secure onto hard hats for better stability. Reflective accents help to keep you safe and seen on the worksite and in low lighting conditions. For times when you must work outside in colder weather, this balaclava will not disappoint.
Features of Ergodyne Two-Piece Fleece and Neoprene Balaclava
- Two-piece polyester fleece with neoprene face mask attached by hook and loops
- 1mm neoprene with one side nylon and one side fleece for additional comfort
- Long length to tuck into a shirt or jacket
- Reflective accents help keep workers safe and seen
- Unique hook and loop suspensions to attach cap to a hard hat for better stability
- Can be worn three different ways
-
The Ergodyne Two-Piece Fleece Balaclava is designed to give you maximum versatility in a balaclava design. Constructed with two pieces, this design allows it to be worn three different ways, as a headpiece, neck gaiter or a full balaclava. Outside hook and loop straps allow it to easily secure onto a hard hat for better stability, and reflective accents help keep you safe and seen while on the job. The polyester fleece is soft and comfortable while trapping heat in close to your head and keeping you warm, and the longer length of the neckpiece allows it to be tucked into a shirt or jacket, ensuring heat stays in and cold stays out. If you’re looking for a versatile piece that will seal out harsh winter weather, look no further.
Features of Ergodyne Two-Piece Fleece Balaclava
- Two-piece polyester fleece attached by hook and loops
- Unique hook and loop suspensions to attach cap to a hard hat for better stability
- Long length to tuck into a shirt or jacket
- Reflective accents help keep workers safe and seen
- Can be worn three different ways
-
The Ergodyne Windproof Hinged Balaclava is made with stretchable fleece and features wind resistant fabric that covers the nose and neck for the ultimate in winter protection and comfort. The hinged design means that you can wear this balaclava as the head cover only, neck gaiter only or full balaclava. Mesh panels around the nose and mouth allow the mask to remain breathable while still providing superior warmth. In addition, reflective elements stand out for extra safety. The longer length of the design allows it to be easily tucked into a shirt or sweatshirt and seal out winter weather. Perfect for many outdoor jobs or activities, you will stay warm and cozy in this versatile balaclava.
Features of Ergodyne Windproof Hinged Balaclava
- Fleece with wind-protectant fabric protects against harsh elements
- Unique hinged design
- 3-panel construction with flatlock stitching for a comfortable fit
- Reflective accents help keep workers safe and seen
- Long length
- Can be worn three different ways
