-
-
Automatic Brightness Control Waterproof Easily changes daytime scope to Night Vision Mounts in front of daytime scope, no re-zeroing required Lightweight and rugged Fast catadioptric front lens system Resistance to severe conditions Comes with Quick Release Mount -
- Automatic Brightness Control
- Waterproof
- One-knob operation
- Mounts to standard weaver rails
- RED ON GREEN or “LIGHT GREEN ON GREEN” reticle system
- Precision windage and elevation adjustments
-
-
-
- Automatic Brightness Control
- 1x magnification
- Waterproof
- Lightweight
- US Military design
- Hand-held or head-mounted as single eye goggle
-
- Use 1 CR123A type battery
- Automatic Brightness Control
- Waterproof
- Built-in Infrared illuminator
- Head or helmet mountable for hands-free usage
- Weapon mountable
- Ergonomic, simple, easy to operate controls
- Compact, rugged design
-
-
-
- Automatic Brightness Control
- 1x magnification
- Waterproof
- One-knob operation
- Depth Perception
- Hands-free usage
- Comfortable flip-up headgear
-
Hand-held, head/helmet-mounted 1x magnification Waterproof Standard Military Issue Combat proven One-knob operation Built-in Infrared illuminatorThe ATN PVS7 Night Vision Goggles is a robust, dependable, high-performance Night Vision System . The ATN PVS7 Night Vision Device is identical to the AN/PVS-7 model and is adopted as a standard issue to U.S. Army ground troops, designed to assist viewing and provide reliable service in the most unfavorable conditions. Full U.S. Mil-Spec body with Goggles assembly, soft carrying case, demist shield, sacrificial filter for objective lenses, shoulder strap, head-mount assembly with 3 brow pads, lens tissue, neck cord and front lens cap.
-
-
-
- Hand-held, head/helmet-mounted
- Water and fog resistant
- Bright Light Cut-off
- Automatic Brightness Control
- Adjustable Interpupillary Distance
- Wide angle infrared illuminator
- 1x magnification
-
-
-
Hand-held, head/helmet-mounted 1x magnification Waterproof Standard Military Issue Combat proven One-knob operation Built-in Infrared illuminator
The ATN PVS7 Night Vision Goggles is a robust, dependable, high-performance Night Vision System . The ATN PVS7 Night Vision Device is identical to the AN/PVS-7 model and is adopted as a standard issue to U.S. Army ground troops, designed to assist viewing and provide reliable service in the most unfavorable conditions. Full U.S. Mil-Spec body with Goggles assembly, soft carrying case, demist shield, sacrificial filter for objective lenses, shoulder strap, head-mount assembly with 3 brow pads, lens tissue, neck cord and front lens cap.
-
- Use 1 CR123A type battery
- Automatic Brightness Control
- Waterproof
- Built-in Infrared illuminator
- Head or helmet mountable for hands-free usage
- Weapon mountable
- Ergonomic, simple, easy to operate controls
- Compact, rugged design
-
-
-
- Automatic Brightness Control
- 1x magnification
- Waterproof
- Lightweight
- US Military design
- Hand-held or head-mounted as single eye goggle
-
- Automatic Brightness Control
- Waterproof
- One-knob operation
- Mounts to standard weaver rails
- RED ON GREEN or “LIGHT GREEN ON GREEN” reticle system
- Precision windage and elevation adjustments
-
-
-
Automatic Brightness Control Waterproof Easily changes daytime scope to Night Vision Mounts in front of daytime scope, no re-zeroing required Lightweight and rugged Fast catadioptric front lens system Resistance to severe conditions Comes with Quick Release Mount
-
- Hand-held, head/helmet-mounted
- Water and fog resistant
- Bright Light Cut-off
- Automatic Brightness Control
- Adjustable Interpupillary Distance
- Wide angle infrared illuminator
- 1x magnification
-
-
-
- Automatic Brightness Control
- 1x magnification
- Waterproof
- One-knob operation
- Depth Perception
- Hands-free usage
- Comfortable flip-up headgear
-
Best Selling Products
-
-
A worthy companion, the TG 12-Hour Pack is expertly engineered to keep you organized and highly mobile. Made of tough 1000 denier polyester, it sports a polyurethane coating in order to maintain rigidity and structure. The exterior boasts plenty of modular storage, including webbing on both the front and shoulder straps. In the generously sized main compartment, you’ll find two mesh pockets with zipper closures. The smaller front compartment houses a comprehensive organizational system, complete with a zipper compartment, two slip pockets and a plastic hook meant to secure keys or other small items. Not only does it offer extensive organization, but it also allows rapid access to essential equipment. A pouch large enough to fit two AR mags can be found on both sides. And to top it off, this pack is hydration compatible, fitting up to 60 oz. with not just one, but two pass-through ports to accommodate both left and right-hand users. Fully loaded with maximum utility features, this daypack is built to excel in a vast range of operational and recreational settings with pure performance.
Features of TG 12-Hour Pack
- Fabric: 1000 denier polyester with PU coating
- Total capacity: 1567.5 cu in (25.68 L)
- 18″ x 11″ x 6.5″ main compartment
- 12″ x 9″ x 1.75″ bottom front compartment
- 17″ x 11″ 1.5 liter hydration pocket
- 5.75″ x 2.75″ web platform on front of bag
- Fleece-lined zip pocket for eyewear and fragile items
- Glove-friendly zipper pulls
- Compatible with hydration systems up to 60 oz.
- Pass-through ports on both right and left side
- Web platform on shoulder straps and front of bag
- Two external compression straps
- Ergonomic shoulder straps system with elastic keepers for strap ends
- D-ring on each shoulder strap
- MOLLE webbing on top front compartment has loop for patch compatibility
- Pouch fits two AR magazines with Velcro flap closure on both sides
- Front compartment complete with a zip compartment, two slip pockets and a plastic hook meant for keys or other small items
- Spacious main compartment with two mesh zippered compartments (one large, one small)
- Reinforced handle
- 100% Satisfaction Guarantee: We stand behind our products 100 percent. If your product fails you, then we have failed. Contact us, and we will take care of you.
-
-
-
The TG Hellfox Fingerless Gloves provide the dexterity required when handling tools and weapons without sacrificing protection. Debossed polyurethane palms offer superior grip for even more control. Hard, molded knuckles and durable ribbed fabric keep hands safe while thoughtfully placed neoprene panels allow for natural movement. Completing these fingerless gloves is the option to customize your fit, the wrist straps adjust and secure with hook-and-loop. You’ll never want to be without them while on the job—and you won’t have to be—a microfiber loop allows for quick attachment to any kit or pack.
Features of TG Hellfox Fingerless Gloves
- Hard, molded knuckle
- Lightweight microfiber loop for hanging up or attaching glovesto a pack (not designed for pulling gloves on)
- Ribbed ottoman, neoprene and microfiber exterior
- Debossed polyurethane palm
- Reinforced palm panel
- Adjustable polypropylene wrist strap with hook-and-loop closure
- Embroidered TG logo on wrist
- Specially placed neoprene provides flexibility
- 100% Satisfaction Guarantee: We stand behind our products 100percent. If your product fails you, then we have failed. Contact us, and wewill take care of you.
-
-
-
H.C.A.R. (Heavy Counter Assault Rifle)
Weapon Specifications:
- Weight – 11.75 pounds (16” Barrel); 12.5 pounds (20” Barrel)
- Length – 38.25 in. (16” Barrel); 42.25 in. (20” Barrel)
- Barrel – Chrome Moly, 4 Groove, 1/10 Twist, 5/8-24 Muzzle Thread
- Barrel Length – 16” and 20” available
- Caliber – .30-06
- Action – Closed Bolt
- Gas System – Adjustable 3 Position*
- Feed System – 30rd Detachable Magazine
- Maximum Effective Range – 1200m
-
-
-
Woodland FA11 Cost Down Army Combat Uniform
-
-
-
DESCRIPTION
- Armored Recovery Vehicle
- 26-ft-long bed can haul up to 26,000 lbs.
- Seats 5 Operators in protected crew compartment
- Cab constructed for steel armor plate with rotating roof hatch
-
-
-
Just like the real-time reconnaissance military drone that inspired the creation of these boots, the Outrider was designed to help you stay a step ahead of the enemy. At just under 19 oz., it’s light enough to keep you quick on your feet. The abrasion-resistant suede leather and ballistic nylon upper is capped off with a full-rubber outsole, meaning you can drag them through hell and back without worrying about wear down. As far as comfort is concerned, a removable EVA cushion insole featuring a sponge rubber heel wedge makes for a responsive feel that returns energy with every step. Made with only the highest-quality materials and an intelligent design, the TG Outrider delivers the best possible boot at the best possible value.
Features of TG Outrider
- AR 670-1 compliant (coyote brown version only)
- Height: 8″
- Weight: 18.6 oz.
- Upper: Suede / 1000 denier ballistic nylon
- Midsole: EVA Cushion
- Outsole: Rubber
- Removable EVA cushion insole with sponge rubber heel wedge
- Abrasion resistant
- Oil resistant
- Side air vents
- Embossed TG logo
- 100% Satisfaction Guarantee: We stand behind our products 100 percent. If your product fails you, then we have failed. Contact us, and we will take care of you.
-
-
-
The Fenix TK20R micro-USB rechargeable flashlight delivers a maximum beam distance of over 1000 feet (310m) by utilizing the CREE XPL HI V3 LED with a maximum output of 1000 lumens. Powered by a rechargeable 18650 battery, this flashlight can also use two cold-resistant CR123As as standby batteries. Features included a dual layer body, inner waterproofing treatment, a tactical tail switch along with a side switch, and battery power indicator. This compact flashlight is designed for tactical and industrial applications.
Features of Fenix TK20R Rechargeable Flashlight
- Weight without batteries: 4.97 oz.
- Length: 5.9”
- Diameter: 1.3”
- Cree XP-L HI V3 LED technology
- Micro-USB rechargeable
- Battery level indicator
- Overheat protection
- Five lighting modes: turbo, high, medium, low and strobe
- Output level: 1,000 lumens on turbo, 350 lumens on high, 150 lumens on medium and 10 lumens on low
- Runtime (based on 2900 mAh): 1 hour 30 minutes on turbo, 4 hours on high, 10 hours 30 minutes on medium and 135 hours on low
- Beam distance: 1,017’ on turbo, 633’ on high, 413’ on medium and 102’ on low
- Peak beam intensity: 24,00 candela on turbo, 9,310 candela on high, 3,970 candela on medium and 240 candela on low
- IP68 rated waterproof protection, underwater for 2 m
- Impact-resistant up to 1 m
- Powered by one 18650 rechargeable Li-ion battery or two CR123A lithium batteries
- Includes flashlight, one Fenix 3.6V/2900 mAh 18650 rechargeable battery, one USB charging cable, one holster, one lanyard, one spare O-ring, user manual and warranty card
- Limited lifetime guarantee
-
-
-
The Ergodyne Windproof Hinged Balaclava is made with stretchable fleece and features wind resistant fabric that covers the nose and neck for the ultimate in winter protection and comfort. The hinged design means that you can wear this balaclava as the head cover only, neck gaiter only or full balaclava. Mesh panels around the nose and mouth allow the mask to remain breathable while still providing superior warmth. In addition, reflective elements stand out for extra safety. The longer length of the design allows it to be easily tucked into a shirt or sweatshirt and seal out winter weather. Perfect for many outdoor jobs or activities, you will stay warm and cozy in this versatile balaclava.
Features of Ergodyne Windproof Hinged Balaclava
- Fleece with wind-protectant fabric protects against harsh elements
- Unique hinged design
- 3-panel construction with flatlock stitching for a comfortable fit
- Reflective accents help keep workers safe and seen
- Long length
- Can be worn three different ways
-
-
-
Dark Woodland BA21 Cost Down Military Uniform
-
-
-
PARATUS® Machine Gun
Paratus® PMG is a Select Fire/Fully Automatic SAFE-SEMI-AUTO weapon system. Only available for LE agencies, Military and Export. These are built per specifications of each government contract. All accessory items like sights, optics, slings, stocks/grips and carry cases of you choice can be supplied as a complete weapon system kit.
Weapon Specifications:- Lower/Upper machined from Aircraft Billet US Aluminum
- Caliber 7.62x51mm Nato
- Stainless steel barrel with 1/10 twist, length options are 12″, 16″, 20″ and 24″
- All MIL-STD 1913 Rail hand guards have Magpul L-4 rail panel attachment points
- Magpul folding stock or PRS (non-folding)
- Direct gas operated
- Weight 10.5 lbs to 12.7 lbs depending on barrel length
- Magazine 20 or 25rd Magpul Pmag
-
-
-
Automatic Brightness Control Waterproof Easily changes daytime scope to Night Vision Mounts in front of daytime scope, no re-zeroing required Lightweight and rugged Fast catadioptric front lens system Resistance to severe conditions Comes with Quick Release Mount
-
-
-
Ready to meet your top line of defense in the field? The Condor EXO Plate Carrier Gen II is an invaluable comrade with an abundance of features to help you perform at your peak. The front map pocket secures quickly and simply with a snap closure, while an auxiliary pocket on the backside fastens with a hook-and-loop closure to ensure tools are accessible when you need them most, and stowed safely when you don’t. A padded mesh interior lining remains comfortable and breathable even after countless hours on the job, and is equipped with internal sleeves for optional soft armor. Heavy-duty webbing on all four sides means no restrictions on modular attachments. Removable shoulder pads with hook-and-loop guides are ready to bear your gear’s heavy load, while adjustable shoulder straps provide mobility for all sizes.
Features of Condor Exo Plate Carrier Gen II
- Drag handle for emergencies
- Adjustable cummerbund with soft armor pockets
- Small/Medium: accepts Medium 6″ x 10″ soft armor
- Large/X-Large: accepts Large 6″ x 12″ soft armor
- Ballistic plates and soft armor not included
-
Our products are for export to Government, Law Enforcement Agencies, and Military Entities only, not available for purchase from us within the United States. Export of these products is controlled by The U.S. Department of Commerce under Export Administration Regulations (EAR) and the U.S. Department of State, Directorate of Defense Trade Controls, Bureau of Political-Military Affairs, in accordance with 22 U.S.C. 2778-2780 of the Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR).