-
-
Optimizing the frame-to-slide-to-trigger guard relationship creates handling characteristics unique among small pistols of its kind. Many pocket guns can be hard to handle and unpleasant to shoot, discouraging practice at the range and time on the hip. However, the 911 .380 both shoots and feels like a full-size firearm, encouraging both practice and daily carry in the most concealable firearm that Springfield currently offers. It’s small frame shooting with the familiarity of a 1911.
Specs
Caliber .380 ACP
Recoil System Full Length Guide Rod w/ Flat Wire Spring
Sights Pro-Glo™ Tritium/Luminescent Front & White Outlined Tritium Night Sight Rear
Weight 12.6 oz
Height 3.9″
Slide 416 Black Nitride, Loaded Chamber Indicator
Barrel 2.7-inch 416R Stainless Steel, Black Nitride Finish, 1:16 Twist
Length 5.5″
Grip Type G10 Grips
Frame 7075 T6 Anodized Hard Coat Aluminum, Octo-Grip Texture on Front Strap & Mainspring Housing, Extended Ambi Thumb Safety
Magazines 1 – 6 Round Flush & 1 – 7 Round Extended, Stainless Steel
-
Caliber 5.56x45mm NATO (.223REM)
Length 35.5″ Fully Extended / 32.25″ Collapsed
Weight 6lbs 11oz
-
-
-
.45ACP
- Custom fit slide to national match frame
- Custom fit national match barrel & bushing
- Polished feed ramp & fully throated barrel
- Springfield Custom match hammer & sear
- Fitted speed trigger w/custom tuned 4 ½ lb. trigger pull
- Tuned for total reliability
- Lowered & flared ejection port
- Tuned & polished extractor
- Standard 1911-A1 recoil spring guide
- Custom fitted beavertail grip safety
- Custom fitted ambidextrous thumb safety
- Low mount Novak rear sight w/matching dovetail front sight
- 3 dot tritium inserts in sights
- Custom fit 1-pc. billet magazine well, matched to bevel on frame
- Hand checkered 20LPI front strap checkering
- Checkered Cocobolo grips
- “Carry Bevel” complete pistol
- “Black T” finish complete pistol
- 6-7 round magazines
- Custom carrying case
- Springfield Custom markings on slide
-
.9MM
- Custom fit slide to national match frame
- Custom fit fully supported ramp national match barrel & bushing
- Polished feed ramp & fully throated barrel
- Springfield Custom match hammer & sear
- Fitted speed trigger w/custom tuned 4 ½ lb. trigger pull
- Tuned for total reliability
- Lowered & flared ejection port
- Tuned & polished extractor
- Standard 1911-A1 recoil spring guide
- Custom fitted beavertail grip safety
- Custom fitted ambidextrous thumb safety
- Low mount Novak rear sight w/matching dovetail front sight
- 3 dot tritium inserts in sights
- Custom fit 1-pc. billet magazine well, matched to bevel on frame
- Hand checkered 20LPI front strap checkering
- Checkered Cocobolo grips
- “Carry Bevel” complete pistol
- “Black T” finish complete pistol
- 6-9 round magazines
- Custom carrying case
- Springfield Custom markings on slide
-
-
-
CDR15 Patrol Rifle
CDR15 Patrol Rifle is available for agency purchase (FET-out) or individual officer purchase (FET-in).
All accessory items like sights, optics, slings, stocks/grips and carry cases of your choice can be supplied as a complete weapon system kit.Weapon Specification:- Semi Automatic Rifle
- Lower/Upper machined from Aircraft Billet US Aluminum
- Caliber 5.56 Nato or 300 BLK
- Melanite plated 16″ Barrel with 1/7 twist with 15″ hand guard
- All MIL-STD 1913 Rail hand guards have M-LOK mounting points
- Mil spec carbine stock and grip
- Direct gas operated
-
CDR16 Machine Gun
CDR-16 is a Select Fire/Fully Automatic SAFE-SEMI-AUTO weapon system. Only available for LE agencies, Military and Export. These are built per each agency specifications. All accessory items like sights, optics, slings, stocks/grips and carry cases of you choice can be supplied as a complete weapon system kit.
Weapon Specifications:
- Lower/Upper machined from Aircraft Billet US Aluminum
- Caliber 5.56 Nato or 300 BLK
- Melanite plated Barrel (1/7 twist) options, 10.5″ 11.5″, 14.5″ (with 10″ Rail), 16″ and 20″ (with 15″ Rail)
- All MIL-STD 1913 Rail hand guards have M-LOK mounting points
- Mil spec carbine stock and grip
- Direct gas operated
-
-
-
PARATUS® Machine Gun
Paratus® PMG is a Select Fire/Fully Automatic SAFE-SEMI-AUTO weapon system. Only available for LE agencies, Military and Export. These are built per specifications of each government contract. All accessory items like sights, optics, slings, stocks/grips and carry cases of you choice can be supplied as a complete weapon system kit.
Weapon Specifications:- Lower/Upper machined from Aircraft Billet US Aluminum
- Caliber 7.62x51mm Nato
- Stainless steel barrel with 1/10 twist, length options are 12″, 16″, 20″ and 24″
- All MIL-STD 1913 Rail hand guards have Magpul L-4 rail panel attachment points
- Magpul folding stock or PRS (non-folding)
- Direct gas operated
- Weight 10.5 lbs to 12.7 lbs depending on barrel length
- Magazine 20 or 25rd Magpul Pmag
-
Paratus® DMR
Paratus® DMR is a Semi Automatic Sniper Weapon System chambered in 7.62×51 Nato or 6.5 Creedmoor. Available for individual officer purchase (USA only) LE agencies, Military and Export. These are built per specifications of each government contract. All accessory items like sights, optics, slings, suppressors, stocks/grips and carry cases of you choice can be supplied as a complete weapon system kit.Weapon Specifications:- Lower/Upper machined from Aircraft Billet US Aluminum
- Caliber 7.62x51mm Nato or 6.5 Creedmoor
- Stainless steel 20″ barrel with 1/10 twist
- 2-Stage match trigger
- Ambi selector and bolt catch
- MIL-STD 1913 Rail hand guard has Magpul L-4 rail panel attachment points
- Magpul folding stock or PRS (non-folding)
- Direct gas operated
- Weight 10.5 lbs
- Magazine 10, 20 or 25rd Magpul Pmag
-
-
-
KIVAARI®
Kivaari is a patented quick takedown semi-auto rifle. Chambered in .338 Lapua Magnum, it offers the most covert semi-automatic gas operated long distance rifle in the worldWeapon Specifications:Caliber: .338 Lapua Magnum
Magazine: 10rd Nitride Coated Metal Box
Barrel: 24” Button Rifled 1-10” Twist Coated Stainless
OAL: 48”
Operation: Semi-Automatic Direct Gas Operated
Stock: Magpul
Grip: Magpul
Weight: 13.75lb
Receiver Material: Upper/Lower/Handguard from US Billet Aluminum
Controls/Safety: Ambi-Selector and Bolt Catch
Charging Handle: Left Side Non-Reciprocating/Folding
Rail: 17” M-Lok Compatible with Full Length MIL-STD 1913 Rail at 12 O’clock and 3.5” Bi-Pod Rail
Muzzle: 4-Port Muzzle Brake
Finish: Hardcoat Type III Anodizing (Black), Cerakote (FDE), and NiB Battleworn
Trigger: 2-Stage Match
-
Paratus® Gen-2
Weapon Specifications:Caliber: 7.62 Nato and 6.5CM
Magazine: 20rd Magpul
Barrel: 16” Nitride Finished 1/10 Twist (7.62 Nato), 20” Nitride Finished 1/8 Twist (6.5CM)
OAL: 29-33”
Operation: Semi-Automatic Direct Gas Operated
Stock: Magpul Folding Adjustable
Grip: Magpul
Weight: 9.5lb
Receiver Material: Upper/Lower/Handguard from US Billet Aluminum
Controls/Safety: Ambi-Selector and Bolt Catch
Charging Handle: Left Side Non-Reciprocating/Folding
Rail: 13” with Full Length MIL-STD 1913 Rail at 12 O’clock and Accepts Magpul L-4 Accessory Panels
Muzzle: 2-Port Muzzle Brake
Finish: Hardcoat Type III Anodizing (Black) and NiB Battleworn
Trigger: 2-Stage Match
-
-
-
M762®
Weapon Specifications:Caliber: 7.62 Nato and 6.5CM
Magazine: 20rd Magpul
Barrel: 16” Nitride Finished 1/10 Twist (7.62 Nato), 20” Nitride Finished 1/8 Twist (6.5CM)
OAL: 35.75-39.75”
Operation: Semi-Automatic Direct Gas Operated
Stock: Magpul
Grip: Magpul
Weight: 9.1lb
Receiver Material: Upper/Lower/Handguard from US Billet Aluminum
Controls/Safety: Ambi-Selector and Bolt Catch
Charging Handle: Mil-Spec
Rail: 13” with Full Length MIL-STD 1913 Rail at 12 O’clock and Accepts Magpul L-4 Accessory Panels
Muzzle: 2-Port Muzzle Brake
Finish: Hardcoat Type III Anodizing (Black) and NiB Battleworn
Trigger: 2-Stage Match
-
CDR-15
CDR-15 is a patented quick change barrel and takedown semi-auto rifle chambered in 5.56 and 300BLK.Weapon Specifications:Caliber: .556 and .300BLK
Magazine: 30rd Magpul
Barrel: 10.5” and 16” Nitride Finished 1/7 Twist (5.56), 8” and 16” Nitride Finished 1/7 Twist (300BLK)
OAL: 24.75-32.75”
Operation: Semi-Automatic Direct Gas Operated
Stock: Magpul
Grip: Magpul
Weight: 6.9lb
Receiver Material: Upper/Lower/Handguard from US Billet Aluminum
Controls/Safety: Mil-Spec
Charging Handle: Mil-Spec
Rail: 7, 10, and 15” M-Lok Compatible with Full Length MIL-STD 1913 Rail at 12 O’clock
Muzzle: Mil-Spec Birdcage
Finish: Hardcoat Type III Anodizing (Black) and NiB Battleworn
Trigger: Mil-Spec
COVERT ARM OF THE FREE WORLD ™
-
-
-
Bore (Caliber) 40mm Weight 14 lbs (6.35 kg) Length 36 in (915 mm) Material 4140/4150 Machined Ordnance Grade Barrel Steel (No Casting) Sight(s) 3×24 Sightmark® Wolfhound® Prismatic Weapon Sight with Custom RPG BDC Reticle
3.5×35 Trijicon® ACOG® TA11 Scope with Custom RPG BDC Reticle
Flip-up Back-up Iron Sights on Picatinny Rail (Standard)
12x Pulsar® Trail XP-50® Thermal Sight (800 m range)
10x Pulsar® Trail XP-30® Thermal Sight (500 m range)Lifecycle 1000 rounds Maximum Range 1,200 meters (round and sight dependent) Effective Range 850 meters (round and sight dependent) Safety Range 20 meters (back blast) Ammunition All Standard RPG-7 compatible rockets Standard Accessories 2-point Sling, Picatinny Rails, Cleaning Kit, Spare Parts Kit, Boresight, Operators Manual, Dust Covers, Vertical Grip Optional Accessories Padded Carry Bag, 3-Rocket Backpack, Hardcase, Harris® Bipod Color Options Classic Grey (standard), Flat Dark Earth, OD Green Warranty Two-Year Limited for Defects in Material and Workmanship Production Capabilities 1,000 per month (with notice) -
CDR15 Patrol Rifle
CDR15 Patrol Rifle is available for agency purchase (FET-out) or individual officer purchase (FET-in).
All accessory items like sights, optics, slings, stocks/grips and carry cases of your choice can be supplied as a complete weapon system kit.Weapon Specification:- Semi Automatic Rifle
- Lower/Upper machined from Aircraft Billet US Aluminum
- Caliber 5.56 Nato or 300 BLK
- Melanite plated 16″ Barrel with 1/7 twist with 15″ hand guard
- All MIL-STD 1913 Rail hand guards have M-LOK mounting points
- Mil spec carbine stock and grip
- Direct gas operated
-
-
-
M203 40MM Grenade Launcher-Folding Stock
Lightweight, Stand-Alone M203 Grenade Launcher with Collapsable Stock
Weapon Specifications:
Bore (Caliber) 40mm Launcher test Trigger Single Action Weight 4.1 lbs (1.88 kg) Length Extended Stock – 29 in (737mm), Folded Stock – 18 in (457mm), Barrel – 12 in (304.8mm) Sight(s) Leaf Sight and Quadrant Sight Maximum Range Leaf Sight and Quadrant Sight Muzzle Velocity 250 feet per second (76 meters) Ammunition Lethal – 40mm x 46mm, Less Than Lethal – 40mm x 40mm Warranty Two-Year Limited for Defects in Material and Workmanship Production Capabilities 350-500 per month -
M203EXPIC 40MM Grenade Launcher (Picatinny Rail Mount System)
The M203 40MM Grenade Launcher with Picatinny Rail Mount and extended receiver to accommodate all rounds, to include Star Parachute Rounds.
Weapon Specifications:
Bore (Caliber) 40mm Trigger Single Action Weight 1.73 lbs (0.78 kg) without Barrel, 2.83 lbs (1.28 kg) with Barrel Length 15.25 in (387.6mm), Barrel Only – 12 in (304.8mm) Material 7075-T6 Aluminum Sight(s) Leaf Sight Maximum Range 437 yards (400 meters) Muzzle Velocity 250 feet per second (76 meters) Ammunition Lethal – 40mm x 46mm, Less Than Lethal – 40mm x 40mm (including Star Parachute Rounds) Warranty Two-Year Limited for Defects in Material and Workmanship Production Capabilities 250-500 per month
-
-
-
.9MM
- Custom fit slide to national match frame
- Custom fit fully supported ramp national match barrel & bushing
- Polished feed ramp & fully throated barrel
- Springfield Custom match hammer & sear
- Fitted speed trigger w/custom tuned 4 ½ lb. trigger pull
- Tuned for total reliability
- Lowered & flared ejection port
- Tuned & polished extractor
- Standard 1911-A1 recoil spring guide
- Custom fitted beavertail grip safety
- Custom fitted ambidextrous thumb safety
- Low mount Novak rear sight w/matching dovetail front sight
- 3 dot tritium inserts in sights
- Custom fit 1-pc. billet magazine well, matched to bevel on frame
- Hand checkered 20LPI front strap checkering
- Checkered Cocobolo grips
- “Carry Bevel” complete pistol
- “Black T” finish complete pistol
- 6-9 round magazines
- Custom carrying case
- Springfield Custom markings on slide
-
M203 EXPIC AK Handguard Mount
This system allows for most AK type rifles to mount the AirTronic M203 EXPIC 40mm grenade launcher. This launcher is compatible with all standard 40x46mm low velocity ammunition, and mounts to a picatinny rail. The AK grenade launcher system works by replacing the existing AK rifle handguards and gas tube with the AirTronic handguard and gas tube.
Weapon Specifications:
Bore (Caliber) 40mm Launcher AirTronic M203 EXPIC Handguard Weight 1.1 lbs. (0.5 kg) – without EXPIC launcher Length 16 in (406 mm) – from AK receiver to EXPIC launcher muzzle Handguard Material Aluminum Sight(s) Quadrant Iron Sight Standard Accessories Installation tools and instructions Optional Accessories Polymer Heat Shield, QD Sling Swivel Color Options Matte Black Warranty Two-Year Limited for Defects in Material and Workmanship Production Capabilities 500 per month (with notice)
-
-
-
SONIS (Stand Off Non-Lethal Interdiction System)
AirTronic-USA introduces SONIS™, the safest, most accurate, non-lethal crowd-control solution available to the law enforcement community. SONIS™, our 40mm, single-shot dispenser, is a lightweight, tactical, and easily deployable unit that is ideal for any fi rst response force. Our kit includes our advanced engineered 40mm dispenser, an array of non-lethal round types, fl ip-up sight, a cleaning kit and customized carrying case. For over 25 years AirTronic has been providing weapons systems that are used by elite military units around the globe, and our products are synonymous with reliability, quality and safety.
Weapon Specifications:
Bore (Caliber) 40mm Weight 4 lbs (1.18 kg) unloaded Length 28.5 in (724mm) Material 4140/4150 Ordnance Grade Barrel Steel (Zero Casting) Maximum Range Up to 438 yards (400 meters) and round dependent Effective Range 109 yards (100 meters) and round dependent Ammunition 40mm Standard BIP, Oleoresin Capsicum, Malodorant, Tear Gas Powder Warranty 2 years or 1000 rounds against factory defects -
Caliber 5.56x45mm NATO (.223REM)
Length 35.5″ Fully Extended / 32.25″ Collapsed
Weight 6lbs 11oz
-
-
-
M203A1/A2 40MM Grenade Launcher
The AirTronic USA M203 system, is a breech-loaded 40mm grenade launcher fully compatible with M16, M4A1/2/3, M5, AK-47 and AK-74. The M203’s lethality and broad versatility make it the prime choice of the U.S. and Foreign Armed Forces as an essential weapon in both offensive and defensive operations. Stand-Alone conversion kits and mounting hardware for the AK-47 and AK-74 are available
Weapon Specifications:
Bore (Caliber) 40mm Trigger Single Action Weight 3 lbs (1.36 kg) Length 15 in (380mm), Barrel Only – 12 in (304.8mm) Material 7075-T6 Aluminum Sight(s) Leaf Sight and Quadrant Sight Muzzle Velocity Leaf Sight and Quadrant Sight Ammunition Lethal – 40mm x 46mm, Less Than Lethal – 40mm x 40mm Warranty Two-Year Limited for Defects in Material and Workmanship Production Capabilities 350-500 per month -
GS-777 Lightweight Shoulder-Fired Recoilless Launcher
The GS-777 is the latest innovation the RPG launcher market. This lightweight shoulder-fired recoilless rocket launcher is compatible with all legacy RPG-7 type rocket ammunition while weighing about 5 lbs. (2.3 kg) less than an RPG-7 launcher.
Weapon Specifications:
Bore (Caliber) 40mm Weight 9.5 lbs. (4.3 kg) Length 36 in (915 mm) Material Composite Sight(s) 3.5×35 Trijicon® ACOG® TA11 Scope with Custom RPG BDC Reticle Lifecycle 500 rounds Maximum Range 1,000 meters (round dependent) Effective Range 700 meters (round dependent) Safety Range 20 meters (back blast) Ammunition All Standard RPG-7 compatible rockets Standard Accessories 2-point Sling, Top Picatinny Rail, Cleaning Kit, Spare Parts Kit, Boresight, Operators Manual, Dust Covers Optional Accessories Padded Carry Bag, 3-Rocket Backpack, Hardcase Features Durable lightweight composite gun tube
Ergonomic trigger group and handling
Center of Gravity moved toward muzzle end to reduce felt weight of a loaded rocket
Single stage lightweight trigger
Quick Detach trigger group
Toolless removal of firing pin group
Heat ShieldColor Options Flat Dark Earth (standard), OD Green, Matte Black Warranty One-Year or 500 Rounds, whichever Occurs First. Limited for Defects in Material and Workmanship. Production Capabilities 1,000 per month (with notice)
-
-
-
.45ACP
- Custom fit slide to national match frame
- Custom fit national match barrel & bushing
- Polished feed ramp & fully throated barrel
- Springfield Custom match hammer & sear
- Fitted speed trigger w/custom tuned 4 ½ lb. trigger pull
- Tuned for total reliability
- Lowered & flared ejection port
- Tuned & polished extractor
- Standard 1911-A1 recoil spring guide
- Custom fitted beavertail grip safety
- Custom fitted ambidextrous thumb safety
- Low mount Novak rear sight w/matching dovetail front sight
- 3 dot tritium inserts in sights
- Custom fit 1-pc. billet magazine well, matched to bevel on frame
- Hand checkered 20LPI front strap checkering
- Checkered Cocobolo grips
- “Carry Bevel” complete pistol
- “Black T” finish complete pistol
- 6-7 round magazines
- Custom carrying case
- Springfield Custom markings on slide
-
OOW249 Squad Automatic Weapon (SAW)
The OOW249 is the belt-fed, air-cooled, fully automatic light machine gun currently deployed by infantry units all around the world. It fires linked or magazine fed 5.56mm NATO ammunition and can be configured in a standard or paratrooper configuration.
Weapon Specifications:
- Caliber – 5.56 x 45mm NATO
- Finish – Phosphate
- Operation – Gas-operated, open bolt
- Feed – M27 linked belt, STANAG magazine
- Weight Empty – 17 lbs. (7.71 kg)
- Length Overall – 41 inches (104.14 cm)
- Barrel Length – 21 inches (53.34 cm)
- Rate of Fire – 750–1,000 rounds per minute
- Effective Range – 1,000 yards (914 meters)
-
Best Selling Products
-
-
McRae 8″ Mil-Spec USMC Hot Weather GTX
For those seeking maneuverability as well as tactical utility in high temperatures, the water-resistant McCrae 8″ Mil-Spec USMC Hot Weather GTX boot is the U.S. Marine Corps’ hot-weather choice. Both durable and reliable, the full-grain coyote suede and Cordura leather upper is suited to perform in any conditions, but is ventilated for breathability in extreme heat. The Vibram Fire and Ice 360 outsole maintains grip on any terrain and offers oil, slip and acid resistance. An internal padded collar protects the wearer from injury and the cushioned polyurethane inner sole ensures comfort, but is also removable. Nylon-coated brass drainage vents pump out excess heat and promote a cool, dry interior. The speedhook lacing system is perfect for jobs that require quick response times. The blend of support, ventilation and lightness makes these boots a flexible, functional, hot-weather option.
Features of McRae 8″ Mil-Spec USMC Hot Weather GTX
- Height 8″
- Full-grain coyote suede and Cordura upper with water resistance
- Direct attach sole construction
- Vibram Fire and Ice 360 outsole with oil, acid and slip resistance
- Removable cushioned PU insole
- Padded collar
- Speedhook lacing system
- Nylon-coated brass drainage vents
- Made in USA
- Berry compliant
-
-
-
Made for firearm enthusiasts and law enforcement entry teams, the Leapers UTG Law Enforcement Tactical SWAT Vest offers rugged design with no shortage of storage options. Several front pockets and a large back pocket provide you with plenty of room to store your extra magazines or supplies. For additional storage, you can use pouches for pistol and rifle magazines, a radio pocket and thumb break holster. This vest is made with a rugged nylon exterior for durability, quilted interior for comfort and adjustable waist and shoulder areas so you can put on this vest easily and have a secure, comfortable fit.
Features of Leapers UTG Law Enforcement Tactical SWAT Vest
- Weight: 2.24 lbs.
- Nylon
- Adjustable shoulder and waist
- Durable nylon exterior
- Quilted interior
- Numerous front pockets and large back pocket for storing spare magazines and supplies
- Right hand crossdraw
- Radio pouch
- Elastic for slot shells
- Thumb break holster
- Pistol and rifle magazine pockets
- Built for law enforcement entry teams
-
-
-
With covert design and durable fabric, the Condor Sidekick Pouch offers versatile storage for all of your tools. This nylon pouch includes an internal paracord system that can bend at a 90 angle, instantly adapting it into a useful work station. Two zippered pockets, one on the outside and one on the inside, provide optimal storage for smaller tools such as knives and pens. Two fixed attachment straps with snaps on the back attach seamlessly to webbing to add the pouch to a pack or belt. This pouch is large enough to hold all of your supplies and small enough to avoid being a burden.
Features of Condor Sidekick Pouch
- Dimensions: 7″ x 5.5″ x 1.5″
- Nylon
- 3″ x 5″ loop field on the front of the pouch for attaching patches
- One external pocket with zipper closure
- One internal pocket with zippered closure
- Internal paracord lets the pouch adapt into a work station
- Internal organization includes webbing for adding other attachments
- Back includes two fixed attachment straps with snaps for easy attachment to webbing
-
-
-
Frog Suit GBT06 Waterproof Cost Down LS
-
-
-
CDR16 Machine Gun
CDR-16 is a Select Fire/Fully Automatic SAFE-SEMI-AUTO weapon system. Only available for LE agencies, Military and Export. These are built per each agency specifications. All accessory items like sights, optics, slings, stocks/grips and carry cases of you choice can be supplied as a complete weapon system kit.
Weapon Specifications:
- Lower/Upper machined from Aircraft Billet US Aluminum
- Caliber 5.56 Nato or 300 BLK
- Melanite plated Barrel (1/7 twist) options, 10.5″ 11.5″, 14.5″ (with 10″ Rail), 16″ and 20″ (with 15″ Rail)
- All MIL-STD 1913 Rail hand guards have M-LOK mounting points
- Mil spec carbine stock and grip
- Direct gas operated
-
-
-
-
-
The Modular Integrated Communications Helmet (MICH) is the primary combat helmet used by soldiers of the United States Army developed by the United States Army Soldier Systems Center to be the next generation of protective combat helmets for use by the U.S. Army. The MICH was originally part of a series of combat helmets designed for the U.S. Army Special Operations Command as a replacement for the PASGT helmet solely within those units. However, the U.S. Army later determined that the improvements presented by the high cut and brim-less MICH over the PASGT helmet warranted organization-wide distribution. The MICH is in use with all branches of the U.S. military in at least some capacity. The MICH was officially adopted as the standard issue helmet of the Air Force Security Forces. MICH helmets are available for purchase by law enforcement agencies and the public. They have become popular with various SWAT units and private security companies.
Features
- 50% nylon / 50% cotton twill
- Hook and loop fasteners
- Sewn in button holes for added camouflage
-
-
-
For optimal knuckle protection and impact resistance, the ultra-versatile M-Pact gloves by Mechanix Wear deliver maximum flexibility and comfort for any job. Engineered with EVA foam-padded impact guards, Thermal Plastic Rubber knuckle guards and an XRD palm for superior grip, these gloves blend precision dexterity and total protection for hard-working reliability throughout the day. The TrekDry material keeps hands ventilated and sweat-free, while the embossed index finger and thumb make operating machinery or handling firearms safe and simple. The thumb and index finger are textured for a secure grip, while the durable microfiber palm will not wear down after extended periods of use. Ideal for the range or for any labor field, these gloves both protect and flex with your hands. A thermoplastic polyurethane wrist strap provides a secure fit, while XRD padding in the palm protects from impact and vibration.
Features of Mechanix Wear M-Pact
- EVA foam-padded Impact Guard on first knuckle
- Thermal Plastic Rubber (TPR) knuckle guard and finger protection
- Armortex palm reinforcement panel
- Dual-layer internal fingertip reinforces the index and thumb for added durability
- XRD palm padding absorbs impact and vibration
- Embossed and textured index finger and thumb provides grip
- Durable microfiber palm
- Moisture-wicking TrekDry material
- TPR closure with hook and loop for a secure fit
- Machine washable
- Imported
-
-
-
- Outer top shell made from 210T Ripstop Nylon with a Teflon ® finish.
- Outer bottom shell made from 210D Nylon Oxford with PU2000mm waterproof finish.
- Inner shell made from 210T Ripstop Nylon.
- 300gm per square meter Dupont ® Thermolite™ Micro insulation.
- Insulation incorporates an ultra-thin barrier of anti-bacterial pure silver micro fiber which also increases its heat retaining capability.
- Insulation is flat filled to prevent cold spots.
- Internal baffle foot is re-enforced with 210D Nylon Oxford with PU2000mm waterproof finish to limit damage from boots.
- Internal and external hanging tabs.
- Bonded seams
- Central double puller, heavy duty No 8 spiral zip with storm flap.
- Anti-snag zip with Velcro tab closure.
- Draw cord and barrel lock in hood.
- Shaped hood for extra comfort.
- Internal PDA pocket
- 210D Nylon Oxford spider compression sack.
- Designed for operations in -20 degree Celsius locations.
- Dims unpacked: Length 228cm. W width: at shoulders 85cm. at feet 55cm.
- Dims packed in compression sack: 27cm x 26cm
- Weight: 1.95kg
- ISO 9001:2000 compliant
-
-
-
Woodland Army BT11 Cost Down Combat Suit side
-
-
-
-
-
This is the super lightweight version of the original Garmont T8 boot. This boot features the same upper construction with a feather light sole built for those with the Need For Speed! The T8 NFS will provide unsurpassed comfort and protection even while standing for long periods of time or excessive walking. The durable upper construction is one that offers excellent breathability and ventilation and the quick drying materials are useful in amphibious environments or extremely wet climates. The Garmont T8 NFS has Zero optical refraction hardware and ball bearing hardware at the instep for flawless performance in all operating environments.
Features
- AR 670-1 Compliant (Coyote Brown style)
- Height: 8″
- Weight: 19 oz.
- Upper: 1,6mm Suede Leather / 250grams Nylon Mesh / Polyester Webbing
- Hardware: Metallic eyelets, closed hooks and ball bearing at the instep
- 8mm Flat Polyester Lace
- Reinforcement / Lining: Mesh 320 grams / Texon / Canvas
- Rubber outsole
- PU breathable footbed
- TPU insert in the heel
- 2mm EVA insole
- EVA midsole
-
Our products are for export to Government, Law Enforcement Agencies, and Military Entities only, not available for purchase from us within the United States. Export of these products is controlled by The U.S. Department of Commerce under Export Administration Regulations (EAR) and the U.S. Department of State, Directorate of Defense Trade Controls, Bureau of Political-Military Affairs, in accordance with 22 U.S.C. 2778-2780 of the Arms Export Control Act (AECA) and the International Traffic in Arms Regulations (ITAR).