Condor Sentry Plate Carrier
Designed to have a more comfortable performance fit while holding standard plates, the Condor Sentry Plate Carrier is versatile and perfect for rapid-response situations. It adjusts to fit waist sizes up to 46 inches and has removable mesh shoulder pads. Easy-access plate pockets accept medium or large ESAPI plates. This plate carrier is perfect for active shooter situations and to store in your car to have ready-to-go. Hook-and-loop webbing allows you to attach a variety of modular accessories. The fully-adjustable, lightweight Condor Sentry Plate Carrier is the perfect basic plate carrier, ready for customization.
Features of Condor Sentry Plate Carrier
- Nylon and mesh construction
- Emergency-drag handle
- Removable, padded mesh shoulder pads with hook-and-loop guides
- Adjustable shoulder straps
- Hook-and-loop webbing on front and back
- Heavyweight webbing for modular attachments
- Padded, mesh interior lining Hook-and-loop hydration/radio antenna straps
- Quick adjust cinches
- Adjustable quick-release buckles
- Quick, easy-access plate pockets
- 30″ to 46″ adjustable waist sizing
- Accepts medium or large ESAPI plates up to 10.25″ x 13.25”
Related Products
-
Ready to meet your top line of defense in the field? The Condor EXO Plate Carrier Gen II is an invaluable comrade with an abundance of features to help you perform at your peak. The front map pocket secures quickly and simply with a snap closure, while an auxiliary pocket on the backside fastens with a hook-and-loop closure to ensure tools are accessible when you need them most, and stowed safely when you don’t. A padded mesh interior lining remains comfortable and breathable even after countless hours on the job, and is equipped with internal sleeves for optional soft armor. Heavy-duty webbing on all four sides means no restrictions on modular attachments. Removable shoulder pads with hook-and-loop guides are ready to bear your gear’s heavy load, while adjustable shoulder straps provide mobility for all sizes.
Features of Condor Exo Plate Carrier Gen II
- Drag handle for emergencies
- Adjustable cummerbund with soft armor pockets
- Small/Medium: accepts Medium 6″ x 10″ soft armor
- Large/X-Large: accepts Large 6″ x 12″ soft armor
- Ballistic plates and soft armor not included
-
The Condor Vanquish Armor System is Condor’s versatile plate carrier system designed to be customized to meet the needs of the tactical operator. With Condor’s on-the-go design, customization is the key to the success of this vest. The base vest is a compact, low profile platform that goes unnoticed under a loose fitting jacket. With the ability to add various accessories, the platform can be configured quickly to meet the operator’s needs in the field. A removable buckle allows for additional attachments, and a loop ID panel on the front and back accommodates patches or one of the many other accessories that are part of the Vanquish Armor System (VAS).
Features of Condor Vanquish Plate Carrier
- Front document pocket with hook and loop closure
- Adjustable shoulder straps
- Detachable shoulder pads with hook and loop guides
- Loop ID panel on the front and back for patches or accessories
- Easy access plate pockets
- Removable buckle for attachments (female end)
- Accepts medium or large ESAPI plates up to 10.25″ x 13.25″
- Adjustable from 34″ to 50″
- Imported
-
The Condor DFPC Defender Plate Carrier provides ultimate personal protection in dangerous environments. Designed to protect in dangerous environments, this plate carrier will accept up to 10.25″ X 13.25″ front and back plates, up to 6″ X 8″ plates on the sides, along with both large and extra large BALCS/SPEAR cut soft armor. In addition to offering protection, it includes a mesh-padded interior for ventilation, padding in the shoulders for comfort and adjustable girth and height for a customized fit. With removable shoulder pads and an emergency drag handle, this plate carrier can adapt to any user without sacrificing an ounce of protection.
Features of Condor DFPC Defender Plate Carrier
- Accepts up to 10.25″ X 13.25″ front and back plates
- Compatible with both large and extra large BALCS/SPEAR cut soft armor
- Heavyweight webbing designed for modular attachments
- Adjustable padded shoulder straps
- Padded mesh interior
- Emergency drag handle
- Removable shoulder pads with hook-and-loop guides
- Plate pockets designed for easy access
- Adjustable height and girth
- Internal sleeves for soft armor
- Imported
- Ballistic plates and Soft armor and ballistic plates sold separately
-
Security and function-heavy defense were front of mind when the folks at 5.11 developed the TacTec Plate Carrier. Its lightweight construction means high-grade ballistic protection won’t slow you down. Comfort is key to providing ultimate protection. Padded straps and panels throughout the vest reduce irritation. Further eliminating uncomfortable hotspots, the tactical vest features breathable airflow channels in zonal areas. As durable as it is comfortable, the TacTec Plate Carrier is made from tightly woven 500 denier nylon. Not only is the material abrasion-resistant, but it also repels water. This fast, light and durable armor is battle-tested and ready to withstand intense operations.
Features of 5.11 TacTec Plate Carrier
- Made from 500 denier nylon
- Water-resistant
- Abrasion-resistant
- Padded shoulder straps utilize breathable aerospace mesh
- Will fit up to an XL (46″-48″ chest)
- Can hold medium (12.5″ x 9.5″ x 2″) or large (13.25″ x 10.25″ x 2.25″) ballistic plates
- Quick-grab extendable/reinforced drag handle with a low-profile look
- Padded zonal panels on the interior of the vest incorporate oversized airflow channels for breathability
- Skeletonized waistband
- One handed quick-release cable/escape system
- Web platform made of laser-cut micro-loop
-
Lightweight and highly functional, the Condor Gunner Plate Carrier is compatible with medium or large ESAPI (Enhanced Small Arms Protective Insert) plates up to 10″ x 13″. Modular pockets on each side of the carrier and an internal document pouch provide space to efficiently store your critical gear. Hydration and radio straps, quick-access plate pockets and an emergency drag handle make this carrier ready for the field. The padded shoulder straps are made with anti-slip materials to hold the carrier in place, and feature additional webbing for accessory attachments. In emergency situations, the quick-collapse pull tab rapidly removes the carrier.
Features of Condor Gunner Plate Carrier
- Compatible with medium or large ESAPI (Enhanced Small Arms Protective Insert) plates up to 10″ x 13″
- Adjustable waist fits sizes 30″-46″
- Quick-collapse pull tab allows carrier to be quickly removed in emergency situations
- Quick-access plate pockets
- Robust emergency drag handle
- Internal pouch for important documents
- Fully adjustable cummerbund for a precise fit
- Detachable, padded anti-slip shoulder straps
- Additional webbing on the shoulder straps for attachments
- Radio and hydration straps
- Self-assemble restoration
- Hook and loop adjustable
- Imported
-
The Blackhawk Low Visibility Ballistic Plate Carrier is a simple, do-it-all vest with a slim design so it can fit under clothes when low visibility is needed. Adjustable shoulder and side straps let you find your ideal fit, while quick-release buckles on the sides make it possible to get the vest on and off in a flash. The MultiCam models use a 500 denier Cordura nylon and the solid colors use 500 denier ripstop nylon, so that no matter which style you choose, you can feel confident this plate carrier will hold up in extreme conditions. This vest features a front hook and loop panel for ID patches and fits Blackhawk ballistic ceramic plates (sold separately).
Features of Blackhawk Low Visibility Ballistic Plate Carrier
- One size fits most
- Made of 500 denier Cordura nylon (MultiCam) or 500 denier ripstop nylon (solid colors)
- Shoulder and side straps adjust
- Vest goes on and comes off easily with side-release buckles
- Lightweight, close-fitting design allows for wear under clothes
- Front hook and loop panel designed for ID patches
- 32PC08 model compatible with Blackhawk Ballistic Ceramic Plates up to 9.5″ x 12.5″ (not included)
- 32PC12 model compatible with Blackhawk Ballistic Ceramic Plates up to 10.5″ x 13.25″ (not included)
