-
Lightweight and compact in design, the Streamlight Sidewinder Rescue uses a variety of color LEDs to produce a wide range of light to fit your given situation. These LEDs give you all of the colors you need for a distress marker without the use of filters than can break or get misplaced. Built in an extremely tough nylon case with a polycarbonate lens, this light is engineered with a 185-degree tilting head to aim the beam exactly where you need it. A “slide-in-place” diffuser is compatible with any LED color and creates omnidirectional light at all angles. The aluminum plate provides a flat surface for a Velcro platform, allowing this light to be attached to a helmet for hands-free illumination.
Features of Streamlight Sidewinder Rescue
- Length: 2.34″
- Weight: 4.38 oz.
- Width: 1.08″
- Depth: 4.65″
- White C4 LED runtime: 5 hours 30 minutes on high, 45 hours on medium 1, 11 hours on medium 2, 100+ hours on low, 10 hours on strobe
- 5mm IR LED runtime: 24 hours on high, 140 hours on medium 1, 60 hours on medium 2, 200+ hours on low, 40 hours on strobe
- 5 mm Red LED runtime: 24 hours on high, 140 hours on medium 1, 60 hours on medium 2, 200+ hours on low, 40 hours on strobe
- 5 mm Blue LED runtime: 16 hours on high, 100 hours on medium 1, 35 hours on medium 2, 150+ hours on low, 30 hours on strobe
- 5 mm Green LED runtime: 16 hours on high, 100 hours on medium 1, 35 hours on medium 2, 150+ hours on low, 30 hours on strobe
- Lumens: 55 on white, 1 on red, 1.8 on blue, 4.5 on green
- Peak beam intensity (candela): 1,175 on white, 40 on read, 130 on blue, 68 on red
- Beam distance: 69 m on white, 13 m on red, 23 m on blue, 16 m on green
- Wavelength: 880 nm on IR, 630 nm on red, 527 nm on green, 470 nm on blue
- Powered with 2 AA alkaline batteries (included)
- Able to be powered with AA lithium batteries (not included) for extended operation in extreme temperatures
- Tethered battery compartment cap allows batteries to be replaced without losing the cap
- Tactile battery polarity indication on the body allows batteries to be replaced in low-lighting settings
- Battery compartment features cord attachment holes capable of supporting up to 25 lbs. of load
- Head tilts 185 degrees to point the beam where you need it
- LEDs deliver all of the colors needed for a distress maker without the use of filters
- White for bright light, blue to alert friendly forces and distinguishes strobe from ground fire, green to preserve night vision, IR for covert operations
- Electronically regulated illumination output
- Compound on-off mode selector economically separates LED selection functions and on-off-dimming-strobe
- “Slide-in-Place” diffuses is compatible with any LED color for light in all directions
- Diffuser provides omnidirectional light according to CID A-A-59176 (MIL-SPEC MIL-L-38217D)
- Design does not require you to to use separate switching locations on the device
- Rubber dome actuator and 4 position pull-to-turn locking rotary selector knob with IR LED tactile indicator allows light to be easily operated, even when wearing gloves
- Housed in a strong, high impact nylon case to deliver extreme durability and water resistance
- Unbreakable polycarbonate lens treated with a scratch-resistant coating for uncompromised beam
- O-ring and gasket sealed openings
- Meets MIL-STD-810F, Method 512.4
- Multiple orientation impact resistant up to 3 meters
- Aluminum plate creates a flat surface to adhere Velcro for attaching to a helmet
- Matching MOLLE retainer and paracord lanyard included
- IPX7 rated waterproof up to 1 meter for 30 seconds
-
The SureFire 6PX Tactical is just that – a flashlight designed specifically for tactical use. Providing simplicity of operation and tremendous illuminating power in a small package, it uses a high-efficiency LED – virtually immune to failure since there’s no filament to burn out or break – to generate a brilliant, penetrating, perfectly pre-focused 600-lumen beam. The 6PX is activated by SureFire’s classic tactical tailcap switch – press for momentary-on, twist for constant-on. The high-strength aerospace aluminum body is smoothly sculpted for a secure grip and is hard anodized to military specifications for extreme resistance to scratches, abrasion, and corrosion. A polycarbonate micro-textured reflector delivers a comparatively wider beam with generous peripheral light.
Features of SureFire 6PX Tactical
- Max Output: 600.0 Lumens
- Tactical Runtime: 1.5 hours
- Length: 5.20 inches
- Bezel Diameter: 1.25 inches
- Weight w/Batteries: 5.2 ounces
- Batteries: 2 123A (included)
- Virtually indestructible LED emitter regulated to maximize light output and runtime
- Precision micro-textured reflector creates smooth, optimized beam
- Tough polycarbonate window resists impact
- High-strength aerospace aluminum body, Mil-Spec hard-anodized for extreme durability
- Tactical tailcap switch-press for momentary-on, twist for constant-on
- Weatherproof—O-ring and gasket sealed
- Includes high-energy 123A batteries with 10-year shelf life
-
SureFire G2X Law Enforcement
SureFire has engineered this unique, upgraded G2X model to provide law enforcement officers with a hard-working flashlight that can meet the rigorous demands of patrol work. Constructed from ultra-durable Nitrolon polymer, the casing contains a nearly indestructible LED, which regulates battery power for maximum beam output. This light features a piercing 400-lumen beam at its highest setting, which can be set to run for a moment or at a constant rate thanks to the dual-output switch located at the tailcap for convenience. The 15-lumen low beam has an impressive 45-hour runtime for long shifts when constant lighting is critical. This lightweight, functional flashlight has a long-reaching beam that also provides peripheral illumination, essential to officers on patrol who need an added tactical advantage.
Features of SureFire G2X Law Enforcement
- Length: 5.2″
- Weight: 4.4 oz.
- Bezel diameter: 1.25″
- Nitrolon polymer body
- Mil-Spec hard-anodized bezel
- Weatherproof O-ring and gasket sealing
- 1.25 hour runtime on high setting
- 45 hour runtime on low setting
- 400-lumen high beam
- 15-lumen low beam
- Dual-output tailcap switch for quick light selection
- Momentary-on high, constant-on high, and low levels
- Virtually indestructible LED for power regulation
- Light-optimizing parabolic reflector
- Takes two 123A lithium batteries (included)
-
Tactical BA02 Cost Down Military Uniform
-
Tactical BA03 Cost Down Military Uniform
-
Condor’s Roll-Up Utility Pouch is a convenient carrying case suited for range and field use. It can comfortably fit up to six 30-round magazines and can be mounted both vertically and horizontally. Ammunition stays secure thanks to a drawstring closure with an additional hook-and-loop flap on top. There are two fixed attachment straps on the back of the pouch that allow for easy mounting to a chest harness, a battle belt or any other tactical gear with universal webbing. This pouch works well as a dump bag for shotgun shells as well because the mouth stays open when mounted. It can also be rolled up for convenient carry, thanks to its small size and compact frame.
Features of Condor Roll-Up Utility Pouch
- Open height: 8.5″
- Open width: 8″
- Folded height: 5″
- Folded width: 4.5″
- Rugged nylon construction
- Accommodates up to six M4 30-round magazines vertically
- Hook and loop flap closure with adjustable paracord drawstring
- Allows for horizontal or vertical mounting
- Two fixed attachment straps on the back with snap closure for universal webbing attachment
- Can be used as a dump pouch use for shotgun shells and empty magazines
-
A worthy companion, the TG 12-Hour Pack is expertly engineered to keep you organized and highly mobile. Made of tough 1000 denier polyester, it sports a polyurethane coating in order to maintain rigidity and structure. The exterior boasts plenty of modular storage, including webbing on both the front and shoulder straps. In the generously sized main compartment, you’ll find two mesh pockets with zipper closures. The smaller front compartment houses a comprehensive organizational system, complete with a zipper compartment, two slip pockets and a plastic hook meant to secure keys or other small items. Not only does it offer extensive organization, but it also allows rapid access to essential equipment. A pouch large enough to fit two AR mags can be found on both sides. And to top it off, this pack is hydration compatible, fitting up to 60 oz. with not just one, but two pass-through ports to accommodate both left and right-hand users. Fully loaded with maximum utility features, this daypack is built to excel in a vast range of operational and recreational settings with pure performance.
Features of TG 12-Hour Pack
- Fabric: 1000 denier polyester with PU coating
- Total capacity: 1567.5 cu in (25.68 L)
- 18″ x 11″ x 6.5″ main compartment
- 12″ x 9″ x 1.75″ bottom front compartment
- 17″ x 11″ 1.5 liter hydration pocket
- 5.75″ x 2.75″ web platform on front of bag
- Fleece-lined zip pocket for eyewear and fragile items
- Glove-friendly zipper pulls
- Compatible with hydration systems up to 60 oz.
- Pass-through ports on both right and left side
- Web platform on shoulder straps and front of bag
- Two external compression straps
- Ergonomic shoulder straps system with elastic keepers for strap ends
- D-ring on each shoulder strap
- MOLLE webbing on top front compartment has loop for patch compatibility
- Pouch fits two AR magazines with Velcro flap closure on both sides
- Front compartment complete with a zip compartment, two slip pockets and a plastic hook meant for keys or other small items
- Spacious main compartment with two mesh zippered compartments (one large, one small)
- Reinforced handle
- 100% Satisfaction Guarantee: We stand behind our products 100 percent. If your product fails you, then we have failed. Contact us, and we will take care of you.
-
The TG Hellfox Fingerless Gloves provide the dexterity required when handling tools and weapons without sacrificing protection. Debossed polyurethane palms offer superior grip for even more control. Hard, molded knuckles and durable ribbed fabric keep hands safe while thoughtfully placed neoprene panels allow for natural movement. Completing these fingerless gloves is the option to customize your fit, the wrist straps adjust and secure with hook-and-loop. You’ll never want to be without them while on the job—and you won’t have to be—a microfiber loop allows for quick attachment to any kit or pack.
Features of TG Hellfox Fingerless Gloves
- Hard, molded knuckle
- Lightweight microfiber loop for hanging up or attaching glovesto a pack (not designed for pulling gloves on)
- Ribbed ottoman, neoprene and microfiber exterior
- Debossed polyurethane palm
- Reinforced palm panel
- Adjustable polypropylene wrist strap with hook-and-loop closure
- Embroidered TG logo on wrist
- Specially placed neoprene provides flexibility
- 100% Satisfaction Guarantee: We stand behind our products 100percent. If your product fails you, then we have failed. Contact us, and wewill take care of you.
-
The TG Hellfox Gloves mix hard with soft, providing protection and dexterity simultaneously. Ideal for law enforcement and first responders, they’re designed to keep hands safe without sacrificing control of weapons and tools. Hard, molded knuckles and ribbed fabric offer a high level of durability, while thoughtfully placed neoprene panels allow for natural movement. The palms of the gloves are made from a grippy debossed polyurethane with an extra panel for reinforcement. Completing the glove is the option to customize your fit—the wrist strap adjusts and secures with hook-and-loop.
Features of TG Hellfox Gloves
- Hard, molded knuckle
- Lightweight microfiber loop for hanging up or attaching gloves to a pack (not designed for pulling gloves on)
- Ribbed ottoman, neoprene and microfiber exterior
- Debossed polyurethane palm and fingers
- Reinforced palm panel
- Adjustable polypropylene wrist strap with hook-and-loop closure
- Embroidered TG logo on wrist
- Specially placed neoprene provides flexibility
- 100% Satisfaction Guarantee: We stand behind our products 100 percent. If your product fails you, then we have failed. Contact us, and we will take care of you.
-
Just like the real-time reconnaissance military drone that inspired the creation of these boots, the Outrider was designed to help you stay a step ahead of the enemy. At just under 19 oz., it’s light enough to keep you quick on your feet. The abrasion-resistant suede leather and ballistic nylon upper is capped off with a full-rubber outsole, meaning you can drag them through hell and back without worrying about wear down. As far as comfort is concerned, a removable EVA cushion insole featuring a sponge rubber heel wedge makes for a responsive feel that returns energy with every step. Made with only the highest-quality materials and an intelligent design, the TG Outrider delivers the best possible boot at the best possible value.
Features of TG Outrider
- AR 670-1 compliant (coyote brown version only)
- Height: 8″
- Weight: 18.6 oz.
- Upper: Suede / 1000 denier ballistic nylon
- Midsole: EVA Cushion
- Outsole: Rubber
- Removable EVA cushion insole with sponge rubber heel wedge
- Abrasion resistant
- Oil resistant
- Side air vents
- Embossed TG logo
- 100% Satisfaction Guarantee: We stand behind our products 100 percent. If your product fails you, then we have failed. Contact us, and we will take care of you.
-
With a sleek design and expert construction, the TG Outsider SZ is a high quality combat boot designed for all-terrain, all-weather use. The upper is made from a blend of full-grain leather and 1000-denier ballistic nylon for optimal durability and resilience in the field. The rubber outsole is rugged enough to handle any terrain and maintains traction even in wet, slippery or icy conditions. The EVA midsole provides critical cushioning for extended periods of wear and supports the foot when running or climbing, while the removable EVA insole delivers added comfort. There is sponge rubber heel wedge within the insole that acts to ease the foot into landings, and keeps wearers comfortable throughout the day. Lightweight, functional and dependable on every mission, this boot does not disappoint. We guarantee it.
Features of TG Outrider SZ
- Height: 8″
- Weight: 20.2 oz. per boot
- Full-grain leather and 1000-denier ballistic nylon upper
- Rugged rubber outsole for improved traction and grip
- Cushioned EVA midsole
- Removable EVA insole with sponge rubber heel wedge
- Polishable toe
- YKK side zipper
- Abrasion resistance
- Oil resistance
- Embossed TG logo on the tongue
- 100% Satisfaction Guarantee: We stand behind our products 100 percent. If your product fails you, then we have failed. Contact us, and we will take care of you.
-
Training Uniforms
